VV22

These power cables are used for electricity supply in low voltage installation systems. They are well adapted to underground use in industrial applications with an additional mechanical protection. These cables can be laying indoor, tunnel and underground. Able to bear external mechanical force, but unable to bear large pulling force.

key word：

VV22

Category：

Electric Power Cable

Enquiry

APPLICATION

CONSTRUCTION

● Conductor: Copper, class 1 or class 2, solid or stranded, circular or circular compacted conductors

● Insulation: Polyvinyl chloride PVC

● Filler: Non-hygroscopic material

● Binder: Non-hygroscopic material

● Inner sheath: Polyvinyl chloride PVC

● Armour: Steel tape

● Outer sheath: Polyvinyl chloride PVC

MAIN CHARACTERRISTICS

Good electrical and mechanical properties. Resistance to abrasion, moisture and sunlight. Adequate resistance to oil and abrasion.

SPECIFICATION

IEC 60228 Conductors of Insulate Cables

IEC 60502-1 Power Cables with Extruded Insulation and Their accessories for Rated Voltages from 1kV(Um=1.2kV) up to 30kV(Um=36kV) - Part 1: Cables for Rated Voltages of 1 kV (Um=1.2kV) and 3kV(Um=3.6kV)

VV22

No. of Cores and Nominal Cross Section	Min. Number of Wires	Nominal Insulation Thickness	Nominal	Nominal	Approx.	Approx. Weight	Max. D.C .Resistance of Conductor
No. of Cores and Nominal Cross Section	Min. Number of Wires	Nominal Insulation Thickness	Steel Tape Thickness	Sheath Thickness	Overall Diameter	Approx. Weight	at 20℃
No.× mm2	No.	mm	mm	mm	mm	kg/km	Ω/km
2×1.5	1	0.8	0.2	1.8	12.6	236	12.1
2×2.5	1	0.8	0.2	1.8	13.4	274	7.41
2×4	1	1	0.2	1.8	15.2	354	4.61
2×6	1	1	0.2	1.8	16.2	419	3.08
2×10	6	1	0.2	1.8	18.7	566	1.83
2×16	6	1	0.2	1.8	20.3	721	1.15
2×25	6	1.2	0.2	1.8	23.5	991	0.727
2×35	6	1.2	0.2	1.8	25.5	1229	0.524
2×50	6	1.4	0.2	1.8	28.9	1580	0.387
2×70	12	1.4	0.2	1.9	32.8	2094	0.268
2×95	15	1.6	0.5	2.1	38.8	3144	0.193
2×120	18	1.6	0.5	2.2	41.8	3743	0.153
2×150	18	1.8	0.5	2.4	46.4	4545	0.124
2×185	30	2	0.5	2.5	50.6	5493	0.0991
2×240	34	2.2	0.5	2.7	56.4	6894	0.0754
2×300	34	2.4	0.5	2.9	62.4	8467	0.0601
2×400	53	2.6	0.5	3.1	69.2	10547	0.047
3×1.5	1	0.8	0.2	1.8	13.1	266	12.1
3×2.5	1	0.8	0.2	1.8	14	314	7.41
3×4	1	1	0.2	1.8	15.8	415	4.61
3×6	1	1	0.2	1.8	16.9	502	3.08
3×10	6	1	0.2	1.8	19.7	692	1.83
3×16	6	1	0.2	1.8	21.4	905	1.15
3×25	6	1.2	0.2	1.8	24.8	1267	0.727
3X35	6	1.2	0.2	1.8	27	1597	0.524
3×50	6	1.4	0.2	1.9	30.9	2087	0.387
3×70	12	1.4	0.2	2	35	2804	0.268

No. of Cores and Nominal Cross Section	Min. Number of Wires	Nominal Insulation Thickness	Nominal	Nominal	Approx.	Approx. Weight	Max. D.C .Resistance of Conductor
No. of Cores and Nominal Cross Section	Min. Number of Wires	Nominal Insulation Thickness	Steel Tape Thickness	Sheath Thickness	Overall Diameter	Approx. Weight	at 20℃
No.× mm2	No.	mm	mm	mm	mm	kg/km	Ω/km
3×95	15	1.6	0.5	2.2	41.4	4140	0.193
3×120	18	1.6	0.5	2.3	44.6	4971	0.153
3×150	18	1.8	0.5	2.5	49.5	6054	0.124
3×185	30	2	0.5	2.6	54	7371	0.0991
3×240	34	2.2	0.5	2.8	60.6	9380	0.0754
3×300	34	2.4	0.5	3	66.7	11484	0.0601
3×400	53	2.6	0.5	3.3	74.6	14504	0.047
4×1.5	1	0.8	0.2	1.8	13.9	304	12.1
4×2.5	1	0.8	0.2	1.8	14.8	364	7.41
4×4	1	1	0.2	1.8	16.9	489	4.61
4×6	1	1	0.2	1.8	18.2	600	3.08
4×10	6	1	0.2	1.8	21.2	839	1.83
4×16	6	1	0.2	1.8	23.2	1113	1.15
4×25	6	1.2	0.2	1.8	27	1578	0.727
4×35	6	1.2	0.2	1.9	29.6	2019	0.524
4×50	6	1.4	0.2	2	34.7	2698	0.387
4×70	12	1.4	0.5	2.2	39.9	3966	0.268
4×95	15	1.6	0.5	2.4	46	5295	0.193
4×120	18	1.6	0.5	2.5	49.6	6377	0.153
4×150	18	1.8	0.5	2.6	54.4	7694	0.124
4×185	30	2	0.5	2.8	60	9495	0.0991
4×240	34	2.2	0.5	3	67	12027	0.0754
4×300	34	2.4	0.5	3.2	74.1	14840	0.0601
4×400	53	2.6	0.5	3.5	82.4	18673	0.047
5×1.5	1	0.8	0.2	1.8	14.7	344	12.1
5×2.5	1	0.8	0.2	1.8	15.8	417	7.41
5×4	1	1	0.2	1.8	18.1	567	4.61
5×6	1	1	0.2	1.8	19.5	702	3.08
5×10	6	1	0.2	1.8	22.9	992	1.83
5×16	6	1	0.2	1.8	25.1	1330	1.15

No. of Cores and Nominal Cross Section	Min. Number of Wires	Nominal Insulation Thickness	Nominal	Nominal	Approx.	Approx. Weight	Max. D.C .Resistance of Conductor
No. of Cores and Nominal Cross Section	Min. Number of Wires	Nominal Insulation Thickness	Steel Tape Thickness	Sheath Thickness	Overall Diameter	Approx. Weight	at 20℃
No.× mm2	No.	mm	mm	mm	mm	kg/km	Ω/km
5×25	6	1.2	0.2	1.9	29.6	1913	0.727
5×35	6	1.2	0.2	1.9	33	2489	0.524
5×50	6	1.4	0.5	2.2	39.4	3670	0.387
5×70	12	1.4	0.5	2.3	43.6	4799	0.268
5×95	15	1.6	0.5	2.5	50.4	6424	0.193
5×120	18	1.6	0.5	2.6	54.3	7758	0.153
5×150	18	1.8	0.5	2.8	60.3	9472	0.124
5×185	30	2	0.5	3	66.1	11621	0.0991
5×240	34	2.2	0.5	3.2	74.2	14827	0.0754
5×300	34	2.4	0.5	3.5	81.8	18251	0.0601
5×400	53	2.6	0.8	3.8	92.2	23887	0.047
3×2.5+1×1.5	1/1	0.8/0.8	0.2	1.8	14.6	349	7.41/12.1
3×4+1×2.5	1/1	1.0/0.8	0.2	1.8	16.4	457	4.61/7.41
3×6+1×4	1/1	1.0/1.0	0.2	1.8	17.9	572	3.08/4.61
3×10+1×6	6/1	1.0/1.0	0.2	1.8	20.5	778	1.83/3.08
3×16+1×10	6/6	1.0/1.0	0.2	1.8	22.7	1044	1.15/1.83
3×25+1×16	6/6	1.2/1.0	0.2	1.8	26.1	1459	0.727/1.15
3×35+1×16	6/6	1.2/1.0	0.2	1.8	27.9	1778	0.524/1.15
3×50+1×25	6/6	1.4/1.2	0.2	1.9	32.8	2416	0.387/0.727
3×70+1×35	12/6	1.4/1.2	0.2	2.1	36.6	3196	0.268/0.524
3×95+1×50	6/15	1.6/1.4	0.5	2.3	43.2	4683	0.193/0.387
3×120+1×70	12/18	1.6/1.4	0.5	2.4	47.2	5771	0.153/0.268
3×150+1×70	12/18	1.8/1.4	0.5	2.5	50.9	6755	0.124/0.268
3×185+1×95	30/15	2.0/1.6	0.5	2.7	56.2	8381	0.0991/0.193
3×240+1×120	34/18	2.2/1.6	0.5	2.9	62.8	10611	0.0754/0.153
3×300+1×150	34/18	2.4/1.8	0.5	3.1	69.1	12994	0.0601/0.124
3×400+1×185	53/30	2.6/2.0	0.5	3.3	76.9	16345	0.0470/0.0991
3×2.5+2×1.5	1/1	0.8/0.8	0.2	1.8	15.3	388	7.41/12.1
3×4+2×2.5	1/1	1.0/0.8	0.2	1.8	17.2	506	4.61/7.41
3×6+2×4	1/1	1.0/1.0	0.2	1.8	18.9	647	3.08/4.61

No. of Cores and Nominal Cross Section	Min. Number of Wires	Nominal Insulation Thickness	Nominal	Nominal	Approx.	Approx. Weight	Max. D.C .Resistance of Conductor
No. of Cores and Nominal Cross Section	Min. Number of Wires	Nominal Insulation Thickness	Steel Tape Thickness	Sheath Thickness	Overall Diameter	Approx. Weight	at 20℃
No.× mm2	No.	mm	mm	mm	mm	kg/km	Ω/km
3×10+2×6	6/1	1.0/1.0	0.2	1.8	21.5	875	1.83/3.08
3×16+2×10	6/6	1.0/1.0	0.2	1.8	24.2	1194	1.15/1.83
3×25+2×16	6/6	1.2/1.0	0.2	1.8	27.7	1668	0.727/1.15
3×35+2×16	6/6	1.2/1.0	0.2	1.9	29.5	1994	0.524/1.15
3×50+2×25	6/6	1.4/1.2	0.2	2	34.9	2743	0.387/0.727
3×70+2×35	12/6	1.4/1.2	0.5	2.2	40	3996	0.268/0.524
3×95+2×50	6/15	1.6/1.4	0.5	2.4	46.2	5320	0.193/0.387
3×120+2×70	12/18	1.6/1.4	0.5	2.5	50.3	6585	0.153/0.268
3×150+2×70	12/18	1.8/1.4	0.5	2.6	53.5	7554	0.124/0.268
3×185+2×95	30/15	2.0/1.6	0.5	2.8	59.9	9538	0.0991/0.193
3×240+2×120	34/18	2.2/1.6	0.5	3	66.2	11948	0.0754/0.153
3×300+2×150	34/18	2.4/1.8	0.5	3.2	72.9	14632	0.0601/0.124
3×400+2×185	53/30	2.6/2.0	0.5	3.5	81.2	18414	0.0470/0.0991
4×2.5+1×1.5	1/1	0.8/0.8	0.2	1.8	15.6	402	7.41/12.1
4×4+1×2.5	1/1	1.0/0.8	0.2	1.8	17.7	536	4.61/7.41
4×6+1×4	1/1	1.0/1.0	0.2	1.8	19.2	674	3.08/4.61
4×10+1×6	6/1	1.0/1.0	0.2	1.8	22.2	933	1.83/3.08
4×16+1×10	6/6	1.0/1.0	0.2	1.8	24.6	1262	1.15/1.83
4×25+1×16	6/6	1.2/1.0	0.2	1.8	28.5	1783	0.727/1.15
4×35+1×16	6/6	1.2/1.0	0.2	1.9	30.9	2217	0.524/1.15
4×50+1×25	6/6	1.4/1.2	0.2	2.1	36.5	3021	0.387/0.727
4×70+1×35	12/6	1.4/1.2	0.5	2.3	41.9	4405	0.268/0.524
4×95+1×50	6/15	1.6/1.4	0.5	2.4	48.2	5859	0.193/0.387
4×120+1×70	12/18	1.6/1.4	0.5	2.6	52.4	7181	0.153/0.268
4×150+1×70	12/18	1.8/1.4	0.5	2.7	57.1	8537	0.124/0.268
4×185+1×95	30/15	2.0/1.6	0.5	2.9	63	10575	0.0991/0.193
4×240+1×120	34/18	2.2/1.6	0.5	3.1	70	13342	0.0754/0.153
4×300+1×150	34/18	2.4/1.8	0.5	3.3	77.4	16455	0.0601/0.124
4×400+1×185	53/30	2.6/2.0	0.8	3.7	87.4	21557	0.0470/0.0991